no sound

Are you trying to install an aftermarket BMW E60 Android head unit but no sound comes out from music or video playing while testing? The sound from factory radio and CD player works well, just no sound from Android screen. Don’t worry, if you follow instructions provided in this post, you can get sound with this solution.

How To Find Out The Exact Problem?

1. Check original AUX

   Firstly you should know that the sound from Android screen transfers to car speakers through original aux mode, so if there’s no sound, the first thing you need to check is your aux, does your aux work well now? You can use a aux cable to connect your phone with the aux jack in the armrest or below  the radio unit, then play music with your phone, and check if the sound from your phone comes out from car speakers, if yes, that means your aux works now.

2. Check original 3 AUX wires
   
   The next step is checking Aux wires from original wiring harness behind the factory radio and CD. Make sure your aux wires match the new aux wires in the same position. Few BMW E60 comes with aux wires in different position or without aux wires from the plug behind the radio. You can check our aux wires from our plug as below:

   

   Our aux wires are with red, white, and black color, 3 wires in a group, you can see below picture:

   

Compare your plug with our new plug to check the 3 aux wires in the same position. If your aux wires are not matched, or your plug does not have aux wires, then you can try our solutions.

This picture shows you the original wiring diagram from BMW E60 E61 radio module M-ASK and CCC.

Check connector B, pin#2 is AUX Left audio, pin#7 is AUX right audio, pin#8 is AUX ground.

So you can check if your aux wires are in the position as above. If not, you can move them to the same position as above. While if there’s no aux wires from your plug as below:

If there’s no sound after installation of BMW E60 Android head unit, here are 2 solutions for you.

First solution:

This is easier, you can buy a aux adapter cable from us. So you can connect it directly with your aux jack in the armrest or at the rear of armrest, which means our unit connects to your aux directly without modifying wires.

Second solution:

Since you have already known how does the sound work, and know you will need to connect your aux with our aux wires, you can also splice our 3 aux wires from the blue plug and connect them with a aux cable.

Splice red, white and black wires, connect them with a cable as below. Then connect that cable to your aux jack.

Feedback from one of our customers in Norway:

I sort thing out. Must mods the black, white and red plug from your unit harness into a aux cable. Then connect its to my aux in inn the armrest. I got sound in that way.

For customers in Dublin, Northern California, USA, close to San Francisco, we have a recommended shop for you. They have already tried and proved the second solution successfully.

If you have any questions, you can leave a comment below or contact us directly.