Nov 14 2017
BMW X5 E70 Radio Screen Removal | Install BMW X5 E70 Android Navigation Head Unit
The factory screen display from BMW X5 E70 and X6 E71 can be replaced with a new aftermarket Android navigation head unit now. If you are thinking about replacing the factory unit with a new one, this post is helpful for you to choose a right model and tell you how to install such a head unit easily.
Which replacement unit is the best for my BMW X5 E70?
Firstly, the best replacement should be easy to use, and it should fit your car perfectly and looks like factory unit, so it looks nice after installed in the car. Secondly, it should displays factory menus including car information and radio, CD interface, and supports steering wheel controls and rear view camera video displaying. Thirdly, the new head unit should add more features like GPS navigation system, USB connection, Bluetooth phone, Bluetooth streaming music, WiFi connection, and even more.
This Android BMW X5 E70 X6 E71 navigation multimedia head unit meet all the above advantages, just click it to visit our site to learn more features and specifications.
Can this Android head unit fit my car?
Well, this unit was developed special for BMW X5 E70 and BMW X6 E71, with factory 6.5 inch small screen or 8.8 inch large screen, for different factory screens the software is a little different, so you should tell us your factory screen size or send a dashboard photo for us to check for you. Besides, for a new model BMW X5 E70 or X6 E71, the original LVDS plug is round, while the old model is with square LVDS plug, so you’d better send us another picture from your LVDS plug for us to check further, the main unit is different for different LVDS plugs.
So, if you need us to confirm if this navigation unit fits and works with your car, you should send us your car information including:
1. car model, manufacture year
2. a dashboard photo from your to show us your factory screen
3. a photo from your LVDS plug behind the factory screen(Don’t worry, it’s easy to remove factory screen)
You can send your car information to us by sending an email to sales@dvdgpsnav.com.
The first part of installation instructions will show you how to take out the factory screen.
How to install this BMW X5 E70 navigation head unit?
- Firstly you will need to remove the factory screen. Use a pry tool(if you don’t have it, you can also use a straight screwdriver) to pry the bottom of air vents.
- When it’s loose, then you can pull out the air vent panel, unplug cables behind, leave it aside, then you will see 2 screws at top which fixed the factory screen.
Use a cross screwdriver to remove 2 screws at top, so that you are able to take out the factory screen.
- In this step you will need to take out the climate control panel and radio/CD, see the 2 screws at the top? Just remove them to take out the climate control panel and CD unit.
- Unplug cables behind, there are 2 new adapter power cables to connect the plugs behind, see below picture:
You can click the above picture to for larger view.
Plug 1: connect it with your factory wiring harness which was connected to the back of CD before.
Plug 2: connect it with the back plug behind the factory CD.
Important Note: If there are fiber optic cables from your factory wiring harness, you will need to move them to our new plug at the same location!
If not, the factory function will not work properly. Please pay attention to this. - There are other plugs with different colors, red, green, blue, grey, white, and black, here’s a picture showing you how to connect all of them, please check carefully and don’t connect wrong!
- If you want to connect an aftermarket reversing camera, there’s a green cable with yellow end to connect the video input from the camera, and there’s a loose REVERSE wire which should connect the trigger line from the camera.
Power for the camera: You should get the power for the reversing camera from your car’s 12V reverse light, NOT from the 12V red and black wire from our unit. - As for the other separate cable with a blue plug, only if your aux wires don’t go through factory CD, then you can use this cable:
Plug 1 and 2: connect your aux plugs in the armrest, firstly you will need to unplug the aux plugs in the armrest, then connect 1 and 2 with them.
Plug 3: connect the back of the new main unit where the blue plug should be.
Plug 4: connect 2 female aux plugs from the power cables, red to red, white to white.
Note: the above red and white aux plugs were connected wrong! The red plug should connect the other red plug, so does the white plug.
If you follow these steps carefully, you should be able to install this unit easily without a problem, installation is not difficult for a professional car stereo shop, if your installer has not installed such a unit before, we highly suggest you sending this installation instruction to him before installation. If you still have any questions, just feel free to contact us, you can take some pictures for us to check, we will do our best to help you.
I
Apr 19 2018
Mercedes Benz W211 Radio Removal and Install Android W211 Navigation Head Unit
If you don’t like the factory UI because it’s old, slow and not modern looking, and would like to add navigation system, then you can upgrade the factory Mercedes-Benz E-Class W211 radio with a new modern Android navigation multimedia head unit now.
How does the new Android Mercedes Benz W211 Android navigation head unit look like?
Learn main features, price and order it here: https://www.dvdgpsnav.com/android-double-din-mercedes-benz-e-class-w211-navigation-dvd-player-e55-e63-e300-e320-e280-e350-e500-head-unit.html
This post will teach you how to remove the factory w211 radio and install the new Android w211 head unit.
Firstly you should prepare a pry tool, if not have you can use a flat screw driver instead.
In order to remove the factory radio you can try the following steps:
After the factory Mercedes W211 radio removed, you can start to install the new Android head unit.
Most Mercedes-Benz E-Class W211 comes with fiber optic amplifier in the trunk, please note the new Android head unit does not support fiber optic amp, so you need to use a long cable B5 connect speakers directly in the trunk. You can check the plug behind the factory radio so that you can know if there are fiber optic cables there, the above picture shows the fiber optic cables so this car has fiber optic amplifier.
If your car does not have fiber optic amp, you just need to use one of the short power cables as below:
There’s a wiring diagram at the bottom of the unit, so you can see how to connect all plugs behind.
Note: another long radio antenna cable is also included, for the car with fiber optic amplifier, you should use the long radio antenna cable.
The next step is to run the long cable to the trunk for w211 with fiber optic amp, a professional mechanic can do it for you easily. You can run the long wires under the carpet along the door frames, removed the back seat to get access to the trunk, and hid the wires behind the cover panel in the trunk.
How to connect plugs in the trunk?
CANBUS decoder should connect to the power cable with a small white plug, the CAN-BUS decoder is used to support steering wheel controls.
How to connect rear view camera with this Mercedes-benz W211 Android navigation?
Note: You don’t need to connect the other BRAKE wire.
Last modified: December 10, 2018 By DVDGPSNAV Posted in Android Navigation System, DVD/GPS Installation, Mercedes Benz • 4 • Tags: android radio w211, Android w211 navigation, benz w211 radio upgrade, installation instruction, mercedes benz w211, mercedes w211 android head unit, w211 back up camera, w211 radio