glk android screen

If you are looking for Mercedes GLK radio upgrade, with a new aftermarket GLK Android screen but keep factory looking, this 7″ Mercedes GLK Android screen head unit is your best choice. After installation, your GLK radio system can support many more features like Apple Carplay, Android Auto, GPS navigation with igo, Sygic or Google maps, Bluetooth music with your phone, WiFi connection for internet and more.

The main features of Mercedes GLK Android screen:

• Keep factory GLK screen menus working and displaying
• Support steering wheel control
• HD 7″ Touch screen, 1024*600 resolution
• Support factory or aftermarket backup camera video display
• Support GPS navigation function
• Bluetooth hands free phone calling
• Bluetooth streaming music with your phone
• Support Apple Carplay and Android Auto
• USB connection for music and video playing
• Built-in WiFi

And it’s with latest Android 9 system, latest Mercedes Benz UI, high speed 8-Core CPU, 32GB ROM, 4GB RAM. You can buy it via this link:

https://www.dvdgpsnav.com/android-mercedes-benz-glk-x204-gps-navigation-multimedia-system-head-unit-bluetooth-wifi-usb-touch-screen.html

Before you install a new aftermarket GLK screen upgrade, you will need to remove the factory GLK screen firstly.

How to remove Mercedes GLK Radio?

1. Firstly you need to use a plastic pry tool or a flat screwdriver to take out the air vents panel. Then disconnect a small blue plug behind.
   
   
   
2. Then you pry out the decoration trim below the air vents and above the CD player. Then you can see 2 screws behind which fix the CD player in the dashboard.
   
   
3. User a screwdriver to remove 2 screws on left and right sides. Then you can take out the CD unit. Disconnect the square power plug behind.
   

   

Mercedes GLK Screen Removal

1. After you removed the GLK radio, you can now remove the GLK factory screen. Firstly you need to pry the plastic frame around the screen.
   
   
2. And  then you can remove the bottom frame at the front of the GLK screen.
   
3. Now you can see 2 screws which fixed the screen, remove 2 screws then you can take out the GLK screen.
   
   And you can disconnect the LVDS plug behind the factory screen, so you can see if it’s with round LVDS plug with 4 pins or square LVDS plug with 10 pins.

Here’s a video to show you clearly Mercedes GLK radio and screen removal.

After you remove the factory GLK radio and screen, you can start installing the new 7″ Android screen. There are many plugs from our control box, but if you look out our installation photos as following, you can connect all plugs easily one by one.

How to install Mercedes GLK Android Screen Upgrade?

1. Firstly install screen cables with the android screen and the control box.
   
   
   You may hear a clip sound if they are well connected, make sure it’s clipped well and tight not loose. The small control box can be put in the glove box or any other place you can put into.
2. Then you can connect other plugs from the control box
   
   CAR-LVDS: this plug should connect your LVDS plug behind your factory screen.
   WiFi: connect WiFi antenna
   GPS: connect GPS antenna
   Mic: connect our microphone
   USB: connect our USB cable

   
   

   Please check carefully, make sure there’s not anything  wrong for any plugs. and make sure all plugs are well connected. You can also take some photos for us to check for you.

3. Another 2 big square plugs from our power cable.
   
   Note: VERY IMPORTANT!
   If there are fiber optic cables from our factory plug behind your radio, you need to move them to our new plug at the same position, and please make sure it’s well connected to our new plug.
   
   
4. If you want to install an aftermarket back up camera, here are 2 cables which need to be connected for the camera:
   
   The camera should be powered with 12V reverse light. If the video from the camera does not look good or no signal, you may need to connect a relay to provide stable 12V voltage to the camera, because your reverse light may not be able to provide stable 12V voltage to the camera, a relay connection can solve this.
5. The sound transfers from our unit to car speakers through your factory aux mode, so if there’s no sound from android music playing, you need to firstly activate factory aux mode from original menus, then touch the screen, the screen will then switch to android menu automatically, then you can play android music.
6. If you or your installer still have questions while installing, please remember to contact us and take some photos for us to check, we will do our best to help you.Our technician can help you online on facebook messenger: https://www.facebook.com/dvdgpsnav or send a message to whatsapp: +86 13424170755