Hyundai

May 13 2019

How To Install 10.1″ Hyundai IX35 Tucson Aftermarket Stereo Android Head Unit?

If your Hyundai IX35 does not have factory navigation or back up camera, a few years later, the factory Hyundai IX35 stereo stopped working, then you can replace it with a new aftermarket radio with GPS navigation system which can supports back up camera as well.

The new aftermarket radio replacement is an Android head unit, with 32GB ROM and 2GB RAM, 10 inch big touch screen. Functions include music and video playing, Bluetooth hands-free, WiFi for internet, Mirror-Link, GPS navigation system, USB and others.

hyundai ix35 android head unit

It’s very easy for me to install such a head unit. Because i know how to dismantle the factory Hyundai IX35 stereo. Besides, installation is plug and play for the new 10.1″ Android unit.

Just follow these steps as following, you should also know how to install it.

How to install Hyundai IX35 Tucson Aftermarket Stereo Android Head Unit

  1. Firstly you should pry the top cover using a plastic installation tool for stereo.

    top cover

    If you don’t have this special tool, using a flat screwdriver is also ok, but you should pry it carefully.

    Hyundai ix35 with top cover off

  2. After you took off the top cover, now you can dismantle the warning light panel.

    warning light

    Inside there are 2 buckles which are very tight, pay attention to that.

    removed warning light

  3. Now you can take out the factory Hyundai IX35 stereo.

    Take out Hyundai ix35 stereo

    As you can see, there are power cables, radio antenna inside.

    radio antenna power cable

  4. Now you can connect the power cable with the new aftermarket Android head unit. Then turn on the car, test if it works well.new power cable

    android head unit installed

    testing

  5. Finished installing.

    finished installing

About steering wheel controls, you may need to study it in settings.  The user manual can be seen in apps > instructions.

Conclusion

This is clean installation, you don’t need to cut wires from original cable. If there’s WiFi, you can connect it to download and install some Android apps from Google playstore.

By the way, the original top cover is salient, it’s not good to put anything else at top dash, this new Android head unit for Hyundai IX35 solved the issue for me.

It fits Hyundai Tucson as well, because they are with the same factory radio, wiring harness is also the same, so the radio replacement is also the same.

Installing a back up camera with this unit is possible, the complicated part is running the long video cable from the front to the back, there’s a camera video RCA cable to connect the camera.

If you are interested in installing a new aftermarket Android head unit for your Hyudai IX35 or Tucson, learn more information about this unit here:

https://www.dvdgpsnav.com/10-1-hyundai-ix35-tucson-stereo-upgrade-aftermarket-android-head-unit-gps-navigation-system-2009-2014.html

In 2016, we also written a post showing how to install a wince system 7″ Hyundai ix35 DVD radio GPS. The 7″ wince model is not available anymore. Nowadays, the 10 inch large screen is popular.

 

Last modified: May 13, 2019 By DVDGPSNAV Posted in DVD/GPS Installation, Hyundai • 0 • Tags: , , , , ,

Nov 10 2016

Hyundai Elantra Navigation DVD – Which Model Fits My Car?

This post will tell you how to distinguish the difference for the dashboard from 2013 and 2014 year Hyundai Elantra, so that you can know and choose which navigation DVD GPS unit perfectly fit your Hyundai Elantra.

The dashboard looks very similar for a 2012, 2013 year Hyundai Elantra and 2014, 2015 year Hyundai Elantra, the most different part is the air vents near both sides of the Hyundai Elantra radio system in the dash, for a 2012 and 2013 year Hyundai Elantra, the in-dash radio usually looks like as following:

Continue Reading >

Last modified: November 10, 2016 By DVDGPSNAV Posted in Buying Guides, DVD Navigation, Hyundai • • Tags: , , , ,

Jun 15 2016

How To Install Hyundai Tucson IX35 Radio DVD GPS Navigation System?

For those who want to upgrade the factory car stereo for Hyundai Tucson or  IX35, in this post you can learn how to install car radio DVD GPS navigation system for Hyundai Tucson which is also called Hyundai IX35, just follow detailed and easy steps one by one, you can even install it by yourself if you have some installation tools, but be careful, or you may damage the front panel or the wiring harness.

With this Hyundai Tucson navigation system, you can get region-free car DVD player, radio, GPS navigation, Bluetooth hands free phone calling, Bluetooth stereo music, USB connection, iPod connection, back up camera video input, steering wheel controls, etc. It replaces the factory Hyundai Tucson radio and CD player, but you can get many more features instead.

So let’s getting started! One-by-One installation instructions as following:

  • Step 1: Firstly we need to take out the hazard warning light part below the factory radio, use special installation tools to pry the bottom edge, and left, right side, then you can easily pry out this part.
    step 1
  • Step 2: Unplug the cable from behind
    remove hazard cable
  • Step 3: Then take out the top cover, similar to step 1, then you are able to remove screws and take out the factory radio and CD.
    step 2
    step 3
    remove factory plugs
    all removed
  • Step 4: Now it’s time to install the new Hyundai Tucson DVD GPS navigation, plug the special cable with the factory wiring harness, not need to modify wires for installation, plug and play. Plug the USB and iPod cable to the back connector of the unit, and GPS antenna. After all cables are connected, you can push it into the dash, install screws, install back top cover and below hazard warning light part, that’s all.
    install new unit
    install top cover
    install hazard light
    installation finished

By the way, you can run the USB and iPod cable to the glove compartment at front of the front passenger seat, GPS antenna can be put at top right comer of the dashboard.

After installation, turn on the car and the unit, you can test it now, enjoy! It takes a professional mechanic about one hour to install this Hyundai Tucson DVD navigation head unit, while if you have experience before you can even install within one hour. All in all, it’s easy to install such a unit and it’s plug and play.

If you have any questions during installation, DVDGPSNav is ready to assist, you can contact us freely.

Useful resource: 

Latest 10.1 inch large screen Android head unit for 2009-2014 Hyundai IX35 and Hyundai Tucson:

https://www.dvdgpsnav.com/10-1-hyundai-ix35-tucson-stereo-upgrade-aftermarket-android-head-unit-gps-navigation-system-2009-2014.html

Android 8.0 system
2GB+32GB
10.1″ HD touch screen
Easy for installation, plug and play

hyundai ix35 radio replacement

Got a question? Contact us via email: sales@dvdgpsnav.com or facebook:

https://www.facebook.com/dvdgpsnav

Last modified: May 8, 2019 By DVDGPSNAV Posted in DVD/GPS Installation, Hyundai • • Tags: , , , , , , ,

Feb 4 2015

Installation instructions for Hyundai Sonata DVD navigation

Hyundai updates Sonata the latest model in 2015, we just upgraded our hyundai sonata dvd navigation with new software and firmware, the new hyundai sonata navigation dvd unit comes with 8 inch touch screen, and there’s a mounting frame included to fix our sonata dvd/gps.

Hyundai Sonata navigation

Normally this sonata DVD unit can fit a 2011, 2012 and 2013 year Hyundai Sonata, however, the version of Hyundai Sonata may be different in different countries, so if you are not sure if this unit fit your car, you’d better contact us and send your car’s model, manufacture year and if possible, a dashboard picture to us, so our technicians can check and make sure if this Hyundai sonata DVD navigation fit your car.

If your car has steering wheel controls, our sonata navigation can support steering wheel control using a CAN-BUS decoder, you can choose the CAN-BUS option before add it to the cart on our site. Besides, if your Hyundai Sonata has an amplifier, you also need to choose this CAN-BUS option which costs only 30USD(it’s free now).

Sonata navigation DVD

The installation for this unit is not a difficult job for a professional mechanic, you need some tools to take out the original front panel, the wiring harness is plug and play. So you don’t need to modify any wires to install this Hyundai Sonata dvd navigation headunit. And there’s a wiring diagram at the bottom of the unit, so you can know which wire is used for its function.

You can check this picture which can show you all steps for installing this Hyundai sonata head unit with GPS navigation system, Bluetooth, USB, SD, iPod and other features.

 

installation instructions for hyundai sonata dvd navigation
installation instructions for Hyundai sonata DVD navigation

New 9″ HD Hyundai Sonata Android radio available for 2011, 2012, 2013 and 2014 year Hyundai Sonata, learn more by clicking here:

https://www.dvdgpsnav.com/9-android-hyundai-sonata-navigation-gps-radio-head-unit-music-video-player.html

2011-2014 Hyundai Sonata Android Radio Upgrade

Last modified: February 27, 2019 By DVDGPSNAV Posted in DVD Navigation, DVD/GPS Installation, Hyundai • • Tags: , , ,

Jan 14 2014

How to study steering wheel control for hyundai elantra 2012 navigation unit?

The setup and using of the steering wheel for the 2011/2012 Hyundai Elantra dvd player navigation head unit

s
While installing our 2012 Hyundai Elantra dvd player, if your 2011 or 2012 year Hyundai Elantra has the steering wheel control function, please operate as below steps:

1. There are 3 steering wheel control cables in the back of our unit, the black cable is the ground cable which is already integrated with our power plug, the other cables are marked as KEY1 and KEY2. Some Hyundai Elantra have onnly 2 cables.

Anyway, firstly, please find the ground steering wheel control cable of your car and see if it has been connected well with our black cable in the back of our hyundai elantra head unit. If the elantra has 3 cables, please connect the other 2 cables separately to any of the other two steering wheel control cables of our unit.

2. Please check the cables whether connect correctly, and then turn on the 2012 hyundai elantra dvd player navigation gps unit, touch the setup button on the right top of the interface to set it

3. Touch the wheel button to set the steering wheel control function

4. When it pop up the interface of steering wheel control, please touch the test button firstly, then you will see the sampling value A or B, this is the original information of your car.

5. Touch the cancel button to eliminate all the previous setup, remember, any time you want to change the setup, you have to touch this button.

6. Now you can study the steering wheel control, when you touch any of the function button, take Vol+ for example, the info bar will display “pls press the key”, this prompt you to press the key on your steering wheel which you want to define, then the info bar will display the value of the key, it means this key is sampled by our unit. Then you can study other keys till you finish all the keys of your steering wheel.

7. After you study all the keys, you have to touch the complete button to save your setup, otherwise, the setup will be invalid

8. If you don’t want to use the steering wheel control function, you can touch cancel button.

9. If you think some value of the keys are too similar, if they are very easy to confuse, you can exchange the 2 cables, change the steering wheel cable to the other steering wheel cable of our elantra unit, and study all the keys again

10. Some cars have only few keys on the steering wheel, maybe some keys on our units are not on your steering wheel, it doesn’t matter, you just need to study the keys on your steering wheel.

Last modified: January 14, 2014 By DVDGPSNAV Posted in Hyundai, Solutions, User Manual • 0 • Tags: , ,

back to top